点击次数：

DOI码：10.1109/JSEN.2020.3014398

发表刊物：IEEE Sensors Journal

摘要：The simultaneous communication and sensing based on antenna sensors are receiving increasing attention for pervasive monitoring in the internet of things (IoT). The open structure for high radiation limits the antenna’s sensitivity and resolution when it functions as an electromagnetic sensor. In this article, an antenna sensor operated in the ultra-high frequency (UHF) radio frequency identification (RFID) band is reported for structural health monitoring (SHM) applications. A loaded split-ring resonator (SRR) renders a low Q-factor bright mode for communication and two back-sited U-shaped strip resonators are embedded among high dielectric material, confining the near-field and yielding a high Q-factor dark mode for sensing. The two modes are proximity coupled and form an electromagnetically induced transparency (EIT)-like effect to achieve simultaneous communication and sensing in the narrow UHF RFID band. An enhancement around five times in the sensitivity can be observed resulting from the trapped field in the dark mode. The simulated sensitivity and the maximum peak realized gain of the proposed antenna sensor are around 3.0 MHz/mm2 and 3.77 dBi respectively. A prototype antenna sensor in a size of 42.0 mm ×42.0 mm ×9.0 mm is fabricated and measured. The detectability of surface crack using the proposed antenna sensor is experimentally validated by two case studies. The measured results demonstrate a sensitivity of 2.73 MHz/mm2 for crack depth characterization and a sensitivity of 2.75 MHz/mm2 for crack width characterization.

论文类型：期刊论文

卷号：21

期号：1

页面范围：651 - 658

是否译文：否

发表时间：2021-01-01

收录刊物：SCI

发布期刊链接：https://ieeexplore.ieee.org/document/9159652